established 1992 Electronics - Parts & Accessories
Online Shopping

Tel: 604-984-7322        mail@cordsplus.com

CR123A 3.0 Volt Rechargeable Battery 800 Mah and 880 Mah with Protection Circuit. 
CR123A 3.0 Volt Rechargeable Battery 650 and 1000 Mah, CR123 3.0 Volt 900 Mah Primary 2 Pack Battery, CR123 Battery Case

CR123 3.6 Volt Batteries
CR123A  3.6 Volt
 800 Mah
Rechargeable Battery
 
# 402 $7.50 ea
CR123A Protected 880 Mah Battery

Ultrafire 16340 / CR123A
PCB Protection Against
 Over-Discharge, Over-Charge
 & Short Circuit.
3.6 Volt
 880 Mah Rechargeable Battery
# 560  $12.50 / 2 Pack
Notes Below
CR123 Battery Charger
CR123A / 16340  3.6 Volt
 Battery Charger
 
# 384 $13.00
Cr123A Battery Case

CR123A Battery Case

Holds 4 Batteries
# 561  $3.60
CR123 Battery Charger
 CR123 3.0 Volt
Battery Charger
 
# 449 $13.00
CR123 3.0 Volt Batteries
 CR123 3.0 Volt 650 Mah Rechargeable Battery
# 443 $7.50 ea



CR123A 3.0 Volt 1000 Mah Rechargeable Battery


CR123A 3.0 Volt 1000 Mah
 Rechargeable Battery
# 562 $12.50


TrustFire CR123A 3.0V 900mAh Primary Lithium Batteries (2-Pack)
TrustFire CR123A 3.0 Volt
 900 Mah Primary Lithium
 Batteries (2-Pack)
Disposable Do Not Recharge
# 563  $7.00 / 2 Pack
The Small Print - Only Larger
CR123A 3.6 Volt Rechargeable Batteries

The Ultrafire 16340 batteries are a replacement for standard
CR123A batteries in many applications. Sometimes called an
 RCr123A or Rechargeable CR123A some caution must be
 exercised as these cells are 3.6V, not 3.0V as is a standard
 CR123A and these cells are also about 1mm longer than is
 standard so if you're using 2 in series you need to be aware
 that they'll be 2mm longer in total and outputting 7.2V (8.4 peak). These are the right choice if your using them in an
 LED flashlight
known to fit this type of cell



CR123 3.0 Volt rechargeable batteries can only be charged
 with the correct 3 Volt charger above or stock number # 325.
 Do not mix / match with primary cells or other
 rechargeable CR123A cells. 

.
 For SureFire and other brands of incandescent halogen,
 kyrton, senon, etc flashlights which have a bulb rated
 7.2V and under we do not recommend this setup. We
typically do not recommend these for any bulb flashlights -
you use them at your own risk in these types of devices
 despite the voltage regulation at it takes the voltage
regulation ~12 milliseconds to activate.
They work great for LED flashlights!

Main Product Page

Home Page

Site Map

Contact Us

Ordering Product

Currency Converter
Solution Graphics
All Prices in Canadian Currency
Custom Search





Pricing and availability can change after being posted on site - please contact us for current prices